Car # 28 - Monday - 09/07/20

Car #28 We started this car on Friday 09/04/20 around lunch time and it was in Rough Shape

We cleaned all the brick shards off the car and between all the tops and realigned all the top blocks

We replaced All the broken and missing left side perimeter blocks and both Corners

We Replaced All of the Traling Edge Perimiter Blocks because they were all missing

We replaced 8 broken or missing Right Side perimeter block most were missing

We replaced 1 Broken front leading Perimiter blocks and releveld all the rest because they were leaning out

We replaced all the top block and installed KOA wool for expansion joints both horizontally and vertically

Put all 48 Brick Support Block on Top and arranged them to fit the setter for Efficiency

We Straigthened both Front Skirt Corners so they would go through the kiln

Painted all 8 sides of all 4 of the Corner Blocks and Painted Number #28 on all 8 sides

There is allot of pictures for this one because there was to much damage to get in just a couple of shots

We got 3/4 of this car completed today and only the Right side is left to Finish Monday 09/07/20

All that is left to do is the replace a few missing Perimiter block and 6 top block on the Left

And cut the new Leading Edge Top Block and it will be completed .